Universal Capping Machine

Product Advantage

The fully automatic four-wheel capping machine enhances production line automation, significantly improving production efficiency. This reduces labor costs and saves valuable human resources and time.

Technical Parameters

1. Parameters: Applicable power supply: 220V/50HZ;

2. Motor power: 0.75KW;

3. Suitable covers: plastic and metal round covers, pump head covers, duckbill covers, etc.;

4. Sealing height: 30-300CM (can be customized);

5. Sealing diameter: 16-70CM;

6. Production speed: 20-45 bottles/minute;

7. Working pressure: 0.4-0.6 MPa

Product Uses

The fully automatic clamp-screw capping machine is an efficient and versatile capping equipment. The fully automatic clamp-screw capping machine has a wide range of applicability. Due to its modular design, it can be customized and adjusted according to the needs of different industries.

Whether it is the pharmaceutical, food, chemical or daily chemical industries, the fully automatic clamp-screw capping machine can quickly adapt to the size, shape and material of different bottle caps according to actual production needs to meet the requirements of various production processes.

The fully automatic clamp-screw capping machine can be widely used in food, cans, beverages, glass bottles, plastic bottles, cosmetics, medicine, daily necessities and other capping industries. It is mainly suitable for screw-pattern flat-head plastic caps to tighten caps, such as: lubricating oil barrels, mineral water bottles, medicine bottles, daily chemical products, beverage bottles, etc. It is simple to adjust and easy to use. Compatible with a variety of bottle caps.

Product Operate Guide

• Preparation

  Before using the capping machine, the following preparations need to be made:

  Confirm whether the power supply and air supply of the capping machine are connected.

  Add or replace the appropriate cap to ensure that the cap matches the container mouth.

  Place the container on the capping machine workbench and adjust the position of the clamp according to the size of the container.

• Operation steps

  The following are the operation steps for using the capping machine:

  Press the start button of the capping machine and the equipment starts working.

  Place the prepared container in the clamp and adjust the position of the clamp so that the container and the clamp are relatively parallel and the clamp can tightly clamp the container.

• Place the prepared cap on the cap feeder and adjust the position of the cap feeder so that the cap can slide smoothly into the capping head. 4.Make sure that the cap is properly docked on the capping head and the surface of the cap matches the container mouth. Press the capping button of the capping machine, the capping head starts to rotate, and the cap is gradually rotated to the appropriate position of the container mouth.

  After waiting for the capping machine to finish rotating the cap, release the clamp and take away the sealed container.

• Precautions

  When using the capping machine, pay attention to the following matters:

  Make sure that the appropriate caps are installed before starting the capping machine.

  Confirm whether the safety protection device of the capping machine workbench is intact to avoid safety problems during work. Avoid using containers that are too large or too small to avoid affecting the stability and sealing quality of the capping machine. When using the capping machine, avoid touching the rotating parts such as the capping head with your fingers to avoid injury. During the operation of the capping machine, replenish the cap feeder in time to ensure the continuity and efficiency of the work.