Automatic Film Sealer Double Heads Rotary Aluminum Foil Heat Sealing Machine for Plastic Cup

Product Advantage

Technical Parameters

1. Main machine appearance main materials are SUS304 stainless steel and T6 hard aluminum alloy;

2. Cup/Bottle diameter:50-100mm(only limit at one bottle diameter, need to replace star wheel & sealing head mold for different bottle diameter,replace time is around 30 mins);

3. Bottle height: 50-200mm adjustable(can customize for special height);

4. Suitable for bottle and cup: plastic bottle or cup, tin can, aluminum can, paper can, paper cup, glass bottle or cup

5. Bottle requirements: hard bottle body, bottle mouth is smooth;

6. Sealing head:2 heads

7. Sealing speed: about 30~35 cans/min(Speed will be different according to different bottles size & premade film type);

8. Aluminum foil requirement: Aluminum foil materials should be corresponding to the can materials(For example: PET material can use the PET film, PE material can use PE film), aluminum foil thickness: 0.1-0.4mm.

9. Automatic film release system: It adopts the starting device to automatically drop the film and release the film accurately.

10. Aluminum/PE film Sealing system: It includes heating and constant temperature control parts, temperature sensor, sealing device, heat sealing plate and heat sealing head, and pneumatic sealing motion execution parts.

11. Rated voltage: Single phase AC220V 50Hz, Conveyor motor power 200W, heating head power 800W, star wheel power 1300W,Total power:about 2300W;

12. Machine size:2800*1030*1700mm, Poly wood case packing size: 2250*1200*1940mm;

13. Net weight:380KG, Gross weight :480KG;

14. Seal time 1.2-2s, temperature set at 180-210℃;

15. Height of conveyor distant to ground is 900mm(+50mm), conveyor belt width:114mm;

16. This machine need additionally configure air compressor, the minimum air source pressure required 0.6MPa.

Product Uses

Fully automatic double chamber sealing machines are widely used in food, medicine, cosmetics, hardware and other industries.

In the food industry, it is mainly used to seal food bags quickly and efficiently, and can keep food fresh. In the pharmaceutical industry, fully automatic double chamber sealing machines are mainly used for sealing in drug packaging to ensure the quality and safety of drugs.

In the cosmetics industry, this equipment can also help improve the sealing and freshness of cosmetics.

In the hardware industry, fully automatic double chamber sealing machines are widely used in the packaging of hardware products to ensure product quality and packaging integrity.

Product Operate Guide

Preparation before starting the machine

• This machine uses a single-phase AC power supply and is equipped with three grounding sockets on the shell. When using it, grounding protection must be done.

• When using it for the first time or the interval between uses is too long, it should be preheated at low temperature for half an hour before normal operation.

• Adjust the height and front and rear positions of the conveyor belt to suit the outer dimensions of the required sealing parts and the horizontal plane of the conveyor belt.

• According to the sealing width requirements, adjust the position of the sealing width positioning frame.

Start-up operation procedure: Plug in the power supply and turn on the main power switch first

• At this time, the red indicator light is on--turn the speed knob to the right

• Adjust to the required operating speed--turn on the heating switch

• Rotate the temperature control dial

• Adjust to the scale line of the required temperature. After about 3-5 minutes, the temperature display pointer will point to the specified temperature value. At this time, it means that the heating zone has reached the specified temperature, and then wait for another 5 minutes. When the temperature of the heating block reaches a stable state, the machine can be put on for sealing test operation.