You are here: Home / Products / Sealing Machine / High Quality High Speed Electromagnetic Induction Aluminum Foil Sealing Machine for Bottles

High Quality High Speed Electromagnetic Induction Aluminum Foil Sealing Machine for Bottles

The aluminum foil induction sealing machine uses the principle of electromagnetic induction to instantly generate high heat on the aluminum foil on the bottle mouth, and then fuses it to the bottle mouth to achieve the sealing function.
Availability:
Quantity:
facebook sharing button
twitter sharing button
line sharing button
wechat sharing button
linkedin sharing button
pinterest sharing button
whatsapp sharing button
sharethis sharing button

Product Advantage

 aluminum foil sealing machine


Intelligent module design, moisture-proof, anti-corrosion, dust-proof, and anti-magnetic interference. Long service life, extremely low failure rate, and simple maintenance.


The host generator of the electromagnetic induction aluminum foil sealing machine adopts transistor and CPU module control and protection functions.


All functional parts on the panel are clearly marked and easy to operate.


There are 4 180℃ copper wire induction coils and 3 220V fans. The sealing speed is fast and the sealing effect is good.


The induction head of the electromagnetic induction aluminum foil sealing machine is adjustable in height and can adapt to the sealing and packaging of containers of various heights.


Full air-cooled heat dissipation system, efficient and high-speed, can work continuously for 24 hours.


The electromagnetic induction aluminum foil sealing machine is made of stainless steel and meets GMP requirements.


Movable, convenient and flexible for use in conjunction with the production line. The cart and host can be detached for easy transportation.


The induction heads and hosts of the same model of electromagnetic induction aluminum foil sealing machines can be interchanged, effectively reducing the cost of use.



Technical Parameters

  1. Rated voltage: AC220V, 50/60HZ

  2. Equipment weight: Gross weight: 38KG, Net weight: 34KG

  3. Maximum power: 1300W

  4. Cooling method: Air cooling

  5. Sealing diameter: 15-60mm (optional)

  6. Sealing height: 20-180mm

  7. Conveyor belt speed: 0-12.5m/min

  8. Sealing speed: 0-200 bottles/min

  9. Packaging size: 970*515*475mm

  10. Main unit size: 805*310*330mm

  11. Appearance: 304 Stainless steel



Product Uses

The electromagnetic induction aluminum foil sealing machine is widely used in various industries for several applications, including:

Application of aluminum foil sealing machine



Food and Beverage: Sealing jars, bottles, and containers for products like sauces, juices, dairy items, and ready-to-eat meals to ensure freshness and prevent contamination.

Pharmaceuticals: Sealing medication containers and vials to maintain sterility and protect against tampering.

Cosmetics and Personal Care: Sealing products such as creams, lotions, and serums to preserve quality and extend shelf life.

Chemical Products: Sealing containers for household chemicals, cleaning agents, and industrial products to prevent leaks and spills.

Nutraceuticals: Ensuring the integrity of dietary supplements and vitamins in bottles and jars.




Product Operate Guide

  • Choose a flat table and place the machine steadily. You can pull the chassis feet apart to make the machine panel easier to observe.

  • Insert the plug on the handheld sensor head into the socket on the panel and tighten it. Pay attention to the positioning notch.

  • Insert one end of the power cord plug into the socket on the back panel of the chassis and the other end into the power supply socket. Be sure to use a single-phase three-wire power supply.

  • Turn on the "Power Main Switch (POWER SW.)" on the back panel of the chassis, press the "Power Switch (SWITCHING)" button on the panel, and wait for the "WARM UP" green indicator light to light up, and the machine can work.

  • Press and hold the "SETTING BUTTON" button and set it to an appropriate value, generally between 0.5-2.0 seconds.

  • Place the sensor head on the container cover and press the start button on the handle. The red "HEATING" indicator light will turn on, indicating that heating is in progress. Do not remove the sensor head. Remove the sensor head after the red "HEATING" indicator light turns off. Wait until the green "WARM UP" indicator light turns on or the internal buzzer sounds a short "beep" before you can seal the next container.


FAQ
  • What is an electromagnetic induction aluminum foil sealing machine?
    Created with Sketch.
    形状 Created with Sketch.
    This machine uses electromagnetic induction to heat and seal aluminum foil lids onto containers, ensuring an airtight and tamper-proof seal.
  • What types of containers can it seal?
    Created with Sketch.
    形状 Created with Sketch.
    It can seal a variety of containers, including glass, plastic, and metal, as long as they have compatible aluminum foil lids.
  • Is it suitable for all types of aluminum foil?
    Created with Sketch.
    形状 Created with Sketch.
    Yes, as long as the foil is designed for induction sealing, the machine can work with various thicknesses and types.
  • How do I adjust the sealing parameters?
    Created with Sketch.
    形状 Created with Sketch.
    Most machines come with an easy-to-use control panel that allows you to set temperature, time, and sealing speed according to your needs.
  • Do I need to clean the machine regularly?
    Created with Sketch.
    形状 Created with Sketch.
    Yes, regular cleaning of the sealing area and maintenance of the machine is essential for optimal performance and hygiene.
  • Can I use this machine for different product types?
    Created with Sketch.
    形状 Created with Sketch.
    Yes, it's versatile and can be used for food, pharmaceuticals, cosmetics, and more, as long as the packaging is compatible.
Previous: 
Next: 
Related Products
Abiding by the marketing concept of "Reputation First, Service Supreme, Quality Foremost," we continually promote new products, provide benefits to every customer, and offer comprehensive technological services and support to our users.

CONTACT US

Phone: +86-189-2891-8174
Email: wechupack@yeah.net
WhatsApp: +8618928918174
Add: 104 The Second Building, No.43 Haichong Road, Shiqi Town,Panyu District, Guangzhou City,China

QUICK LINKS

PRODUCTS CATEGORY

SIGN UP FOR OUR NEWSLETTER

Leave a Message
KEEP IN TOUCH
​Copyright © 2024 Guangzhou Weichuang Machinery Co., Ltd. All Rights Reserved. | Sitemap | Privacy Policy